How to fix BLUE SCREEN ERROR WIN32K SYS

BLUE SCREEN ERRORS are generally the result of a hardware malfunction or device driver issue. It is also possible to receive a Blue Screen Error because of bad system memory, malfunctioning power supply, components overheating, or hardware over clocked further than its specification. In older versions of the Windows OS you may also find Blue Screen Errors due to incompatible DLL files. Since the only alternative when receiving a Blue Screen Error is to reboot, any unsaved data is lost. With that in mind, it is very important to remove these errors to protect your data. The blue screen error win32k.sys blue screen error can be caused by a number of reasons. More than likely it is not a hardware issue behind it; it might also a software issue. With some simple commands you can sort out this issue and even increase your performance for your whole computer in the process.

HOW TO RESOLVE BLUE SCREEN ERRORS:

Scan your hard disk:

The first thing we suggest is to run a scan disk on your system to ensure your files are indexed correctly and not on a corrupted segment of your hard drive. If you have a number of corrupted segments, you have to make sure that you might not need to replace the hard drive in the near future. If it requires to be replaced, replace it just to keep your stuff safely and if not requires to be replaced then you have nothing to worry about and it will also help to ensure that you are not having indexing issues causing you problems.

Defragmenting Hard disk:

After you accomplish a scandisk you have to try defragging to ensure that all files are continuous and not all over the hard drive. This will also clear any segments to help to ensure and prevent corruption issues. The major reason to run this is for the continuous files which will help to ensure you that your hard drive access is running as fast as it can.

Registry tune up:

After running the defrag, we would highly recommend running a registry cleaner to check for pointer errors that may be reason for the win32k.sys blue screen error. The registry cleaner will ensure all registry entries are indexed and pointed properly. If any errors would be found, it will tell you about and also allow you a chance to fix them or delete them if you want to know exactly what it is changing.

Drivers:

After all of the above the last thing we would check is to ensure all of your drivers are up to date for all the hardware you have. Allow windows update to do this to ensure you have it for the exact version of hardware and your Operation system, or you can go to the manufacturer’s website and get it yourself if you are computer professional enough to do so. Obviously none of this may fix the win32k.sys blue screen issue, but it may just do so, preventing you from having to use more extreme measures to resolve the issue. So doing a scandisk, defragging and a registry cleaner is one option you can use to confidently resolve this issue preventing you from reinstalling the whole system.

One in all of the most successful method to resolve the win32k.sys blue screen is the use of registry cleaner tool; Find out how to repair and restore your computers performance by using this Complete PC Maintenance Utilities. Or if you want less pricey registry cleaner, you should use Registry Easy.

If you need further assistance please please visit http://www.livetechcare.com

How to fix Blue Screen Error 1033 Message

Every computer faces a problem blue screen of death, with the blue screen that is displayed in your computer there is an error message in your computer as well. Sometimes you are prompted to shut down your PC and are not allowed to open any other program in your computer, then in that case there is an error message on the screen of your computer, this error message can also give you the information how to diagnose the problem. When there is blue screen in your computer there is also ans error message and different error messages can indicate different problems.

When you find the error 1033 message, then your computer has some invalid memory in it. The access memory it occurs when IRQL is too high. This message is usually displayed when you install a faulty driver, or BIOS is installed. This may pop up and prevent you from working on your computer. To protect your computer from such error message you are recommended to follow some steps carefully
• To avoid blue screen error 1033 message, you are recommended to back up all your system files in an order to avoid the mess.
• If your computer is running normally then leave to run it in that way, do not install any unwanted software program, because it may hamper the speed of your computer. avoid to upgrade graphic cards and drivers if you are not an expert, it can put your computer at risk.
• One of the reason of getting the blue screen error 1033 message is that sometimes you simply shutdown your computer without following the normal procedure, so it is recommended to avoid abnormal shut down of your computer,
• It is highly recommended to possess a large RAM in your computer, and if your computer does not possess large RAM then avoid running different programs at a time it may harm your PC. Also do the disk clean up of your computer it can avoid the errors. Defragmentation is also recommended.

Livetechcare is one of the reputed and renowned company our expert technicians can resolve any problem related to your computer supports you to avoid blue screen error 1033 message.

If you need further assistance please visit http://www.livetechcare.com

How to fix Blue Screen Error

After completing an upgrade installation of Leopard and restarting the computer, a “blue screen” may appear for an extended period of time. You may have third-party “enhancement” software installed that does not work with Mac OS X 10.5 Leopard.

Option A : Use another Mac to remove application enhancement software

If you have a second Mac that has a FireWire port (even if it’s not running Leopard), and a FireWire cable that you can connect to both computers, use this solution:

1. Start your original, affected computer in Target Disk Mode by holding the T key, and connect it to your second computer. Your exaggerated computer’s hard disk volume(s) should appear on the desktop of the second computer.
2. Open the second computer’s mounted disk volume (where Leopard is installed), then open the System folder, then the Library folder, and finally the System Configuration folder.
3. Locate “Application Enhancer bundle” and move it to the Trash. Important: Do not delete any other files from your Leopard disk.
4. Enter an admin account name and password if provoked.
5. Drive out the mounted volume(s). (Disconnect the FireWire cable if you want).
6. Turn off the original computer and start it up again (holding no keys).

If the issue persists, or if the “Application Enhancer bundle” file was not on your Leopard volume, use Option B.

Option B: Reinstall Leopard

If you can’t use option A, it may be necessary to perform an Archive and Install installation of Leopard. Archive and Install moves Mac OS X system files to a folder named Previous System, and then installs a new copy of Mac OS X on the chosen volume. Mac OS X–installed applications, such as Address Book and Safari, are archived, and new versions are installed in the Applications folder. Applications, plug-ins, and other software may have to be reinstalled after an “Archive and Install.” You will probably want to check “Preserve user and network settings” when starting the installation.

Note: After installation, confirm each third-party software product is compatible with Leopard before reinstalling it, particularly any application “enhancement” software.

Option C: Use the command line (advanced) to remove application enhancement software

Try this answer if you are comfortable using Terminal and have certain application expansion installed. The software may be removed following the below steps:

1. Start up in single-user mode by holding Command-S after restarting the computer. Note that single-user mode always uses the US English keyboard layout.
2. Type these commands, each on a single line followed by Return:

 

 

/sbin/fsck -fy
/sbin/mount -uw /
rm -rf /System/Library/System Configuration/Application Enhancer. bundle
reboot

Blue screen crash will show all of your pending and an error screen that suddenly come to light that informs you that your screen is freezing. In calculation, some errors DLL will also appear and ask if you recently added any new hardware or programs on your computer. When this incident occurs, they have vanished mad, especially if you have not saved or finish something you’re working. Of course, you have to do your job again from the commencement. The easiest and best way to solve this problem is to run registry cleaner software. And if you’ve decided to let a technician fix your computer for you, stop there, you do not want to pay for something you can fix yourself, right ? Also, if you want to ask about any  technician may be able to resolve the accident, which will undoubtedly tell you that it is a very complex matter and therefore should be treated by a specialized like him. If the technician is not to say there will be no business left for him. But in reality, what is going to do is just run a registry cleaner in the drive and then asks for the payment of reparations and the software used. Furthermore, unloading, setting up and repair of the blue screen error using a software is not very difficult to do and that saves time and, well, why would you pay someone else just to make something simple for you ? Here are some things you can do to fix and solve your blue screen crash. This is especially useful if you’re not familiar with the technical team and just want quick and easy solutions.
1. Restart your computer

Sometimes the blue screen comes out only once and then not again for a second time. In this case, a simple restart is just what you need to resolve the blue screen crash.
On the other hand, if the problem is more regular, you may have to deal with other things.

2. Replace your Random Access Memory (RAM)

RAM is a hardware that is eternally installed inside the computer’s motherboard. It is a rectangular piece that keeps the information. This is where the CPU gets the commands. And once this equipment is not functioning normal, without doubt, the computer may crash in the blue screen. And so, the replacement of the RAM can be a solution.

3. Run a registry cleaner

A registry cleaner can remove errors in your record. This record stores all information regarding the software, drivers, applications and games that are installed on your computer. And in time, it can get bad, because some outdated entries are not deleted and can lead to what they identify the “blue screen of death.”

If you need further assistance please visit http://www.livetechcare.com